-
21944 Southwind Rd
Andalusia, AL 36421
PH: 334-222-7957
-
M-F 8:00 am - 6:00 pm
Sat 8:00 am - 12:00 pm
Store Details
Hustler COMBI RX148
Features
KEY FEATURES
Twin Speed Chainless Rear Floor
The twin speed rear pusher blade is powered by hydraulic cylinders and greaseless slides for low maintenance and longevity.
Finger Tip Control
Standard with our New Feed Control in-cab electric joystick gives fingertip control over the entire feeder, letting you control the feed row of any feed type and density. And with bales and silage mode you can easily switch between automated mode or full control.
Toughest Chains & Drives
From the toughest 12,000lb roller chains to the high-tensile (Bisalloy®) sprockets, the new RX range is built to handle the heaviest loads with ease.
Impact Resistant Floors
Our unique heavy-duty puckboard floors are slippery, durable and extremely tough, they handle the impact of heavy beets landing on them without damage. 15mm thick rear floor and 12mm thick cross floor for longevity.
View Through Visibility
When it comes to visibility no other wagon beats an RX. See right through to the rear of the machine and into the cross floor with no obstructions blocking your view.
Toughest Feed Bars On The Market
We’ve gone to a larger RHS feed bar, giving maximum torsional strength with a lower profile for the best of both worlds.
Strongest Axles On The Market
Toughest axle design with massive 2,200 cm2 of pivot surface area and 100 mm diameter pivot pins means you’ll never be repairing an axle again.
Single Post Draw Bar with Massive Link Arm Clearance
The unique drawbar on the Combi RX provides superior maneuverability and linkage arm clearance when compared with other wagons. The new design weighs the load both when on the jack and attached to the tractor without the need to fold and unfold a parking stand.
Adjustable Chain Tensioners
All chains have adjustable tensioners with easy access for long life and simple servicing.
Self Aligning Bearings
Combi RX features self-aligning bearings instead of bushes for longer service intervals, more reliability and lower maintenance
Single Elevator Ram
A single elevator ram is used to eliminate twisting and reduce maintenance. The ram is also mounted out of harm’s way from debris off the tires and from silage juices damaging the seals.
Bale String Tie Points
Integrated tie points along the length of the wagon to tie bale strings
Scale Ready
2.46 times stronger than the old design, the unique design of Combi RX’s load cell integration makes adding scales easier and with fewer load cells there’s wiring, fewer electronics and less to go wrong
Removable Draw Bar Eye
With a bolted drawbar eye Combi RX is designed to suit your preferred hitch type, be it a fixed eye, swiveling, clevis or spoon type. And with huge clearance, it works just as well with pickup hitches
Protected Motor Drives
Protected for safety and reliability the hydraulic motors are shielded
Protected Hydraulics & Electrics
Simple hydraulic and electric component design for reliability the valves are protected from the elements beneath an easy access cover
Low Maintenance Elevator Fans
The new Combi RX has just one set of elevator spillage fans for simplicity and with clever Hustler innovation, we’ve managed to reduce the number of fans for the required tilt angle reducing maintenance and eliminating 14 wearing parts from the design!
Largest Ground Clearance
Largest ground clearance on the market, the Combi RX’s elevator, is out of harm’s way eliminating the chance of damage to the working parts of the machine when operating in undulating terrain.
Load Dividing Design
Combi RX’s load dividing design reduces the load on all drives making for a longer-lasting machine. And because the floors travel less per load they don’t wear out like other wagons
Low Friction Floors
Combi RX’s tough 15 & 12mm thick floors built for impact resistance and low friction they handle the knocks with ease and take less power to move the load
Integrated Access Ladder
Equipped as standard Combi RX comes with an access ladder built-in, providing easy access when removing bale strings
Industry Best Visibility Into Wagon and Elevator
See exactly what you’re feeding from the comfort of your seat, no other wagon provides this much visibility
Hose Holder
Integrated hose holder comes standard to minimize the possibility of hoses chaffing and downtime.
Gearbox Drives On Cross Floor
Hydraulic gearbox drives are now standard to eliminate moving parts and improve reliability and increase the drive power.
Rams
Internally ported rams eliminate hose failures and downtime, another clever innovation from Hustler
Feedpad Kit Standard
Now standard equipment the Combi RX range, come feed pad ready and eliminate spillage of feed in the isle
Covered Shafts
The driveshafts are covered to eliminate feed material from wrapping, which could create jamming, blockage and unnecessary constraints on the gear.
Central Greasing
The central greasing station for the axle comes standard on all the Combi RX models and difficult-to-access grease points.
Cable & Hose Tracks
Cable and hose tracks are built into the design as standard to protect them from the possibility of damage
Built-in Mudguards
Mudguards come as standard and are tapered to prevent the build-up of material when loading
High-tensile sprockets
The sprockets mounted on the Combi RX range are made of high-tensile, a high-resistance material also called Bisalloy® used for manufacturing earthmoving equipment cutting edges.
Specifications
Round Bales (single layer): | 3-6 |
Medium Squares: | 6-8 |
Large Squares (8ft long): | 6-8 |
Loose Silage (load-level): | 14 m³ | 494 ft³ |
Loose Silage (heaped load): | 16.5 m³ | 580.5 ft³ |
Maximum Load: | 10,000 kg | 22,046 lb |
Overall Width: | 2950 mm | 116.1 in |
Overall Length: | 6750 mm | 265.7 in |
Overall Height/Loading Height: | 2430 mm | 95.6 in |
Tare weight: | 4200 kg | 9259 lb |
Standard Tyres: | 400 / 60 x 15.5 Flotation Grip Tread |
Axle: | Tandem Walking Beam |
Brakes | Optional 2 or 4 wheel braking |
Weigh Scales: | Optional Feedlink weighing and feed management system |
Floors (Bed Floor / Cross Floor): | 15 mm (0.6 in) HD Puck Board / 12 mm (0.47 in) HD Puck Board |
Chains (Bed / X floor / Elevator): | Chainless / Twin 12,000 lb Roller Chains / Twin 12,000 lb Roller Chains |
Feed bars (Bed / X Floor / Elevator): | Twin Hydraulic Rams / 65 x 35 RHS / 40 x 40 RHS |
Joystick: | In-cab Electric Control w/ Bales and Silage Mode |
Hydraulics required: | 2 x double-acting |
Hydraulic Flow: | 50-70 L/min (80 L/min maximum) | 13.2-18.5 gal/min (21.1 gal/min maximum) |
Hydraulic Pressure: | 2050-2500 psi | 140-170 bar |
Elevator width: | 1645 mm | 64.7 in wide chain/slat |
Jack: | 80 mm | 3.1 in 2-speed screw, with quick adjustment. Designed strong enough for use as quick hitch stand |
Towing Eye | 50 mm | 2 in in swiveling forged eye |